Dual-voltage control
15,000 volts for recessed areas
25,000 volts for large areas
Greater powder adhesion
Minimal overspray
Better multi-coat coverage
This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven. The Hot Coat Dual Voltage system should only be used in a clean, dry, well-ventilated work area! A dedicated electric oven or toaster oven will be needed to cure the powder. Most powders will cure at 400 Degrees Fahrenheit after becoming a liquid form. Always read directions on powders for proper curing temperatures. Note - Always wear a dust mask when handling or applying powder.
